Dettagli dei prodotti

Casa. > prodotti >

Sistema convenzionale di allarme antincendio

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers

Tutte le categorie

Sistema convenzionale di allarme antincendio

sistema di allarme antincendio indirizzabile

Alarme antincendio Detettore di fiamme

Detettore di fumo autonomo

Contattaci

Ms. Claire

Claire.tian@xinheantech.com

+8615986702194

Contatta ora

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers

Marchio:	XHA
Numero di modello:	XHA1002
Moq:	1 pz
Prezzo:	negotiable
Dettagli dell' imballaggio:	370mm440mm100mm
Condizioni di pagamento:	T/T, Western Union,

Informazioni dettagliate

Descrizione del prodotto

Informazioni dettagliate

Luogo di origine:

Certificazione:

Documento:

Collegato:

Pannello di allarme per fumo convenzionale a 2 zone

Alimentazione elettrica:

90-270VAC

Back -up Battery:

1*12V SEILED ACACO DI CHIED

Corrente di allarme:

<150 Ma

Corrente normale del monitor:

<50ma>

Personalizzato:

Accettabile

Nome:

Pannello di allarme antincendio zona 2

Tipi di rilevatori di fumo:

Rilevatore di fumo fotoelettrico

Capacità:

Max 30 Detector convenzionali in una zona

Capacità di alimentazione:

500 pezzi/mese

Descrizione del prodotto

Conventional 2 Zone Fire Alarm Panel For Fire Safety Alarm System

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers 0

Introduction

The information provided in this manual covers the Master and Slave fire alarm control panel. The panel range is designed to

meet the requirements of EN54 Parts 2 & 4.

The fire alarm control panels (2 Zones) provide all of the sophisticated features required of a leading edge conventional fire

alarm system along with the simple operation and efficient installation methods demanded by both installers and building

users.

A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization,

photoelectric, photoelectric-thermal and heat detectors.

Each of the system components has been specifically designed to operate as part of the system. This provides assurance

that the control panel, smoke detectors, interface devices and the ancillary components are all fully compatible with one

another and that the full range of system functionality is supported by each device.

Product Features

2 conventional input zones.

Each zone can be connected with 30 conventional fire detectors. Each panel has external devices control output points, Through the points, the panel can control such external devices as bell, siren, flame detector, beam detector etc.

Dedicated alarm and trouble relays.

1 RS485 can be able to connect the other panel.

Housed in a 370mm W x 440mm H x 100mm D metal enclosure.

Enclosure supports 1 12V, 2.3Ah backup batteries.

The panel can be used independently or connect by RS485.

Specification

Primary AC	120VAC 50/60 Hz Power supply rating
Primary AC	240VAC 50/60 Hz
Power supply rating	2 Amps @ 24VDC
Maximum Battery Charging Current	0.90 Amps @ 26VDC
Initiating Device Circuits Zones	Alarm Zone 2/4/8/16
Normal Initiating Operating Voltage	22VDC, Maximum 26VDC, regulated
Normal Monitor Current	<50mA
Alarm Current	<150 mA
Short Circuit Initiating Current (per zone)	35mA Maximum
Maximum Initiating Resistance (per zone)	10 ohms
Initiating End-of-Line Resistor	4K7 ohms, 1/2W 5%
Standby Detector Current (per zone)	4mA maximum
Maximum Detector Count (per zone)	30 detectors
Initiating Cabling Type	18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance	430 ohms
Fault Relay rating	2A & 30VAC, resistive
Alarm( Auxiliary ) Relay rating	2A & 30VAC, resistive

Connection Diagram

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers 1

Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Pannello di allarme antincendio convenzionale

Pannello di controllo dell'allarme antincendio convenzionale

Detettore di fumo convenzionale

Dettagli dei prodotti

Casa. > prodotti >

Sistema convenzionale di allarme antincendio

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers

Tutte le categorie

Sistema convenzionale di allarme antincendio

sistema di allarme antincendio indirizzabile

Sistema di estinzione a gas

rivelatore del fascio

Alarme antincendio Detettore di fiamme

4 Detettore di fumo

Detettore di gas domestico

Detettore di fumo autonomo

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers

Marchio:	XHA
Numero di modello:	XHA1002
Moq:	1 pz
Prezzo:	negotiable
Dettagli dell' imballaggio:	370mm440mm100mm
Condizioni di pagamento:	T/T, Western Union,

Informazioni dettagliate

Descrizione del prodotto

Informazioni dettagliate

Luogo di origine:

Cina

Marca:

XHA

Certificazione:

Numero di modello:

XHA1002

Documento:

Brochure del prodotto PDF

Collegato:

Pannello di allarme per fumo convenzionale a 2 zone

Alimentazione elettrica:

90-270VAC

Back -up Battery:

1*12V SEILED ACACO DI CHIED

Corrente di allarme:

<150 Ma

Corrente normale del monitor:

<50ma>

Personalizzato:

Accettabile

Nome:

Pannello di allarme antincendio zona 2

Tipi di rilevatori di fumo:

Rilevatore di fumo fotoelettrico

Capacità:

Max 30 Detector convenzionali in una zona

Quantità di ordine minimo:

1 pz

Prezzo:

negotiable

Imballaggi particolari:

370mm*440mm*100mm

Tempi di consegna:

3 giorni lavorativi

Termini di pagamento:

T/T, Western Union,

Capacità di alimentazione:

500 pezzi/mese

Descrizione del prodotto

Conventional 2 Zone Fire Alarm Panel For Fire Safety Alarm System

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers 0

Introduction

The information provided in this manual covers the Master and Slave fire alarm control panel. The panel range is designed to

meet the requirements of EN54 Parts 2 & 4.

The fire alarm control panels (2 Zones) provide all of the sophisticated features required of a leading edge conventional fire

alarm system along with the simple operation and efficient installation methods demanded by both installers and building

users.

A comprehensive range of auxiliary devices is available to operate with the fire control panels including optical, ionization,

photoelectric, photoelectric-thermal and heat detectors.

Each of the system components has been specifically designed to operate as part of the system. This provides assurance

that the control panel, smoke detectors, interface devices and the ancillary components are all fully compatible with one

another and that the full range of system functionality is supported by each device.

Product Features

2 conventional input zones.

Dedicated alarm and trouble relays.

1 RS485 can be able to connect the other panel.

Housed in a 370mm W x 440mm H x 100mm D metal enclosure.

Enclosure supports 1 12V, 2.3Ah backup batteries.

The panel can be used independently or connect by RS485.

Specification

Primary AC	120VAC 50/60 Hz Power supply rating
Primary AC	240VAC 50/60 Hz
Power supply rating	2 Amps @ 24VDC
Maximum Battery Charging Current	0.90 Amps @ 26VDC
Initiating Device Circuits Zones	Alarm Zone 2/4/8/16
Normal Initiating Operating Voltage	22VDC, Maximum 26VDC, regulated
Normal Monitor Current	<50mA
Alarm Current	<150 mA
Short Circuit Initiating Current (per zone)	35mA Maximum
Maximum Initiating Resistance (per zone)	10 ohms
Initiating End-of-Line Resistor	4K7 ohms, 1/2W 5%
Standby Detector Current (per zone)	4mA maximum
Maximum Detector Count (per zone)	30 detectors
Initiating Cabling Type	18AWG Twisted Shielded pair (14 – 18 AWG)
Detector Base Impedance	430 ohms
Fault Relay rating	2A & 30VAC, resistive
Alarm( Auxiliary ) Relay rating	2A & 30VAC, resistive

Connection Diagram

2-Zone Fire Alarm Control Panel – Reliable Build for Small-Scale Facilities, Built-In Fault Self-Diagnosis & Easy Troubleshooting, Reducing Maintenance Hassle for Property Managers 1

Service

1. OEM &ODM service.
2. Provide technical support and after-sale service.
3. 1 year warranty.
4. Normally 15 working days lead time.
5. Welcome sample order.

Tag: